|
APOLLO SPECIFICATIONS |
|
Measurement Range |
J-Type: -346 to +2192 degrees F (-210 to +1200 degrees C)
K-Type: -328 to +2498 degrees F (-200 to +1370 degrees C)
T-Type: -418 to +752 degrees F (-250 to +400 degrees C)
E-Type: -238 to +1832 degrees F (-150 to +1000 degrees C) |
|
Display Resolution |
0.1 degree F/C < 1000 degrees
1.0 degrees F/C > 1000 degrees |
|
Accuracy |
J, K, T, and E-Type; ±[0.1 percent +1.0 degree F (0.5 degrees C)]
[Below -148 degrees F (-100 degrees C): add 0.2% of reading
for J, K, and E-Type; and 0.1% of reading for T-Type] |
|
Temperature
Coefficient |
0.01 percent of reading 0.1 degree F per degrees F(+0.05 degree C per degree C)
for <+64 degrees F (+18 degrees C) or +82 degrees F (+28 degrees C)
[Below -148 degrees F (-100 degrees C): add 0.05 percent of reading
for J, K, and E-type; and 0.1 percent of reading for T-type] |
|
Real Time
Clock Tolerance |
About 1 second per day |
|
Maximum Differential
Common Mode
Voltage |
1V (maximum voltage difference between
any pair of inputs) |
|
Temperature Scale |
ITS-90 (International Temperature Scale of 1990) |
|
Applicable Standards |
N.I.S.T. Monograph 175 revised to ITS-90 |
|
Dimension |
7.20 (H) x 3.70 (W) x 1.70 (D) inches |
|
Weight |
Approximately 16.2 ounces |
|
Battery |
2 x LR03 (AAA) type 1.5 Volt |
|
Certification |
CE |
|
Safety |
IEC 1010-1 (2001), UL 3111-1 (6, 1994),
EN 61010-1 (2001), CSA C22.2
No. 1010.1 (1992) |
|
CAT I |
IEC 1010-1 (2001), UL 3111-1 (6, 1994),
EN 61010-1 (2001), CSA C22.2
No. 1010.1 (1992) |
|
Compliance |
IEC 60529: IP67 (Ingress Protection rating)
Water Immersion (3 feet up to 30 minutes)
No ingress of dust (20mBar up to 8 hours.) |
|
Accuracy is specified for ambient temperatures between 64 degrees F (18 degrees C)
and 82 degrees F (28 degrees C) for a period of 1 year. The above specifications do not
include thermocouple error. |
|
Calibration
The Apollo Digital Thermometer’s annual calibration, starting one year after purchase, is recommended to ensure that the
thermometer performs to its accuracy specifications. To calibrate the thermometer, contact your nearest UEi distributor or
UEi Service Center at 1-800-547-5740. |
