Miller X11009 X 11009 ShockFusion HLL System End Corner Roof Post Fall Protection

Miller Fusion X11009 HLL Horizontal Lifeline System End/Corner Roof Posts absorb the energy from a fall and keep forces down close to the surface of the roof.

Unlike corner and end posts, the tipping motion of the ShockFusion end post doesn't increase the lifeline length, but positions the lifeline close to the surface of the roof which reduces force to the base of the post.

	Standing Seam Aluminum clamping mechanism is designed to pre-install to the base plate and is self centering for easy installation. All clamping bolts are secured above the base plate for easy and quick fastening & inspection. 3 models available to fit spacing of standing seams up to 24 inches (610 millimeters).
	Metal Sheathing Made for attaching to metal sheathing that has a min. of 24 gauge (0.024 inches [.61 millimeters]) in thickness. Hardware kit has sealing material that prevents roofing water damage.
	Membrane Built-up Toggle kit attaches through the membrane, insulation material and into the wood sheathing, metal sheathing or even concrete. Units available for built up roofing thickness to accommodate a maximum of 10.5 inches (267 millimeters).
	Wood Lag screw kit included. Attaches to plywood with min. thickness of 5/8 inch (15.9 millimeters) CDX.
	Concrete Decking Concrete expansion anchors included. Attaches to concrete decking with a min. thickness of 6.5 inches (165 millimeters) & min. concrete compression rating of 20.7 MPa (3000 PSI).

Miller ShockFusion Fall Protection Comparison Chart

X11009 Horizontal Lifeline Roof System Applications

Maintenance and roof inspection
Solar panel, ventilation fan, and air conditioning maintenance
Cleaning skylights
Removal of debris from rain gutters
Satellite dish maintenance and installation as well as other communication applications

Miller ShockFusion Fall Protection X11009 Roof Post With 45 Degree Corner Bracket

45 Degree Corner Bracket for ShockFusion Roof Post

Miller X11009 ShockFusion Fall Protection Roof Post With Turnbuckle Tension

Turnbuckle Tesion Indicator for ShockFusion Roof Post

Miller X11009 ShockFusion Fall Protection Roof Post With 90 Degree Corner Bracket

90 Degree Corner Bracket for ShockFusion Roof Post

X11009 ShockFusion Specifications
Materials
Shock Absorber	Stainless Steel (304)
Internal Connection Components	Stainless Steel (18-8 and 304)
Post Tube Construction	Powder Coated, Zinc Plated Steel; Cast 6061-T6 Aluminum (Anodized)
Post and Base Plate Seal	Neoprene and HDPE
Post Cap Construction	HDPE w/UV Inhibitor
Technical
Activation Force	1,000 pounds (4.4 kN)
Shock Absorbing Force	2,500 pounds (11.1 kN)
Ultimate Strength Rating	5,000 pounds (22.2kN)
Fusion Certifications	Meets OSHA 1910.66, 1926.502, EN795 Class C and ANSI A10.32
System components meet design specifications required in CSAZ259.16-2004 and ANSI Z359.6.Please note that the installed ShockFusion system must be determined to be in complianceby an experienced and qualified engineer.

Miller Fall Protection Catalog
Miller ShockFusion Brochure
Miller X11009 Roof Post Datasheet
Miller ShockFusion Base Assemblies
Miller ShockFusion Bases
Miller ShockFusion Corners
Miller ShockFusion FAQ
ShockFusion Compenent Selection Guide