AC Tool Supply has the guaranteed lowest prices on trusted brand name quality tools and test equipment. 877-207-1244
Contact Us
Internet Payments

Net 30 Day payment terms
0 item(s) | TOTAL: $0 view cart
Home Blog My Account Contact Us About Us Shipment Tracking Terms & Conditions GSA Orders Financing / Leasing International Customers
Request a Quote OSHA / ANSI Safety Guide Canada Customers Faxing Purchase Orders Privacy Policy Price Match Guarantee
Insulation Vacuum Systems
Bacharach
Capital Safety DBI-SALA
Infrared Thermography Training
Insulation Blowing Machines
Intec Insulation Blowers
Knipex Hand Tools
Krendl Insulation Blowers
Met One Instruments
Miller Fall Protection
Nikro
OSHA & ANSI Safety Products
Speciality Tools
IECC International Energy Conservation Code
2015 IECC International Energy Conservation Code
2018 IECC International Energy Conservation Code
Insulation Machine
Used Insulation Equipment
3M
Advanced Cable Ties
AEMC
Air Systems International
Allegro Industries
Bacharach
Bradley
Bullard
Can-Filters
Capital Safety
Chicago Protective
Cool Machines
CorDEX Instruments
DeWALT
E Instruments
Falltech
Generac
General Floorcraft
Gillette Generators
Greentech
Guardian
Honeywell
Infraspection Institute
Insulation Machine Corp IMC
Intec
Kimo
Knipex
Krendl
Met One Instruments
Miller
MSA Safety
NIKRO Industries, Inc.
Novatek
Oberon Safety
Pro Built Tools
Radians
Rapid Care
Reed
Salisbury
Schaefer Ventilation Equipment

Guardian G1562HTR 15 Gal Portable Emergency Eyewash Drench Hose Unit
Guardian G1562HTR Portable Heated Emergency Eyewash Unit 15 Gallon
 
Product Resources

 

Your Price:
$1,608.74
Quantity

Guardian G1562HTR 15 Gal Portable Emergency Eyewash Drench Hose Unit

Guardian G1562HTR is a self contained emergency eye wash unit with a heated jacket.

This portable eyewash unit delivers more than 10 useable gallons (37.9 L) of water for 15 minutes which is compliant with ANSI Z358.1-2009 eyewash provisions. It is heated & insulated to withstand sustained low and freezing temperatures for long time periods. Fully freeze resistant and tempered for indoor & outdoor environments making it perfect to use where continuous potable water supplies are not available, such as in remote plant facilities, low traffic and / or low hazard work areas.

Jacket and tank
The 15 gallon pressurized stainless steel tank has an air intake fitting, built in carry handles, pressure gauge & relief valve. The tank yields approximately (37.9 litters) 10 gallons of usable capacity. The heating element is fabricated with silicone rubber & is attached onto the tank using a spring latch. Internal tank water temperature is regulated with an on-board thermostat set to 65 degrees F. The total draw is 3.33 Amps & delivers 400 Watts of power which enables the unit to function at temperatures as low as -20 degrees F.


Ground Fault Plug
A 15 Amp (GFCI) Ground Fault Circuit Interrupter comes standard with a manual reset which is connected to a 9 ft. cord.

Emergency Eyewash Unit
2 GS Plus spray heads have flip top dust covers, internal flow controls & filters. It operates with a 1/2 inch IPS chrome plated brass, stay open 3 way self-draining ball valve with flag handle. A pressure regulator
controls the eyewash water flow to 0.65GPM for 15 min.


For unit operation, fill with potable clean water & add the bacteriostatic additive which is supplied with your unit. The additive prevents bacteria growth, algae, fungus & acanthamoeba inside the unit. After the unit is filled, pressurize it to 80PSI air pressure. If needed, adjust the pressure regulator in order to reach maximum flow for 15 minutes. Inspect your eyewash unit regularly & the water should be changed once every 6 months minimum. Filling instructions are included.

Guardian G1562HTR Features
  • ANSI Z358.1-2009 compliant
  • Stainless steel 15 gallon pressurized tank
  • Silicone rubber heating element
  • 15 Amp GFCI
  • 2 - GS Plus Eyewash spray heads
  • Eyewash flow 0.62 GPM for 15 minutes
  • Drench hose with 6 ft. reinforced PVC hose
  • Bacteriostatic additive supplied with unit
  • Weight
    • 41.5 pounds empty
    • 124.8 pounds filled
  • Unit is assembled, pressurized & water tested at our factory
  • Unit is depressurized & emptied before shipping (Some assembly required)
  • ANSI compliant ID sign is permanently fixed to the insulated jacket


Choose Options and Quantity
Accessories G1540BA - 8 oz. bottle bacteriostatic additive [+$62.25]
200-013R - 2 wheel hand cart to transport and storing unit [+$390.00]
 Related Items
Bosch RDN6V 6 Inch 5/8 TPI Demolition Reciprocating Sawzall Blades
$4.03
Add To Cart
Novatek 139.0215 Electric Peening Prep Kit 2" Rotopeen Flaps Star Cutters
$1,995.00
Add To Cart
Kimo SPA 150 SP Smart Plus Temperature Probe Pt100 Class 1/3 DIN
$124.58
Add To Cart

Home

About Us

Contact Us

My Account

Secured By Rapid SSL $10,000 Warranty




Copyright © AC Tool Supply Inc. All Rights Reserved.