AEMC L322 2126.06 4 to 20mA Simple Logger II Current Logger

The AEMC Simple Logger II L322 is a 2 channel 4-20mADC current data logger.

Users of the Simple Logger II L322 data logger can easily configure the device to optimize memory usage by selecting data storage modes and storage rates. There are many application-friendly features including delayed start time and Extended Recording. The user can select rates from 125 minutes to 1 day. Current can be measured up to 20mADC with 0.1mA resolution. The main benefit of the logger is its ability to perform many different recording tasks easily with intuitive setup from a computer using DataView software. The logger samples analog information on the input and converts it to a digital signal, which is processed and stored with time and scale details. An optically isolated USB port allows transfer of data from the logger’s internal memory to the computer for analysis. Features Two independent input channels Current measured up to 20mADC with 0.1mA resolution. Programmable storage rates from 8 per second to 1 per day Three operator selectable storage modes: Stop when full, FIFO or XRM Stores up to 240,000 measurements in non-volatile memory Powered by 2 AA Alkaline batteries Compact, lightweight, fits anywhere 5 LED indicators clearly and quickly display Logger status Includes FREE DataView software for real-time display, data storing, analyzing data and generating reports 50V Cat III     Applications Sensor monitoring Process control monitoring and troubleshooting General DC current monitoring Directly profiles temperature, flow, pressure and other parameters

Simple Logger II Model L322 Electrical Channels 2 Input Connection Detachable terminal strip Measurement Range 0 - 25mAdc Resolution 0.1mA Accuracy (DC and 50/60Hz) 0 - 1mA: unspecified 1mA - 30mA: ±(0.25 Percent of Reading plus 100µA) Sample Rate Eight samples taken at storage interval Storage Rate Programmable from 125ms - 1 day Storage Modes Start/Stop, FIFO and Extended Recording Mode (XRM) Recording Length 15 minutes - 8 weeks, programmable using DataView Memory 240,000 measurements (512KB) The recorded data is stored in non-volatile memory and will be retained even if the battery is low or removed. Communication USB 2.0 optically isolated Power Source Two 1.5V AA-cell alkaline batteries Battery Life 100 hours to >45 days (dependent on sample rate and recording length) Mechanical Dimensions 5.43 x 2.75 x 1.28" (138 x 70 x 32 millimeter) Weight (with battery) 6.4 ounces (181 grams) Case UL94-V0 Vibration IEC 68-2-6 (1.5 millimeter, 10 to 55Hz) Shock IEC 68-2-27 (30G) Drop IEC 68-2-32 (1 meter)