The new refrigeration system analyzers are the professional's choice for service and maintenance. With real time superheating and subcooling calculations by 2 temperature compensated pressure sensors, the new generation of refrigeration system analyzers has been defined.

Testo Easy Kool Software

Readings can be displayed graphically or in tabular form with Testo's new Easy Kool software. A commissioning report can be created if all actions taken during commissioning are recorded. The uninterrupted documentation of the data over a defined period allows the targeted diagnosis of the causes of malfunctions. The commissioning data as well as all inspection data are available anytime. This makes interference with the system including unauthorized interference transparent. The data are manipulation proof. The use of the measurement system, instrument, and software not only helps to be more accurate and considerably faster, but it also increases customer satisfaction as all relevant data are available.

Digital display

The digital display is much more easy to read than an inaccurate and clumsy analog gauge. The risk of inaccuracy in reading analog displays is always present, caused by the so called parallax error, which states that the respective angle of sight has an effect on the result read. Frequent vibrations can also make reading the display additionally difficult, but with a digital instrument, your accuracy will be unsurpassed in the refrigeration industry.

0560 5563 556 1 RSA Features:

Easy refrigerant inventory management according to the F gas regulation
The filling or refilling of a system can be documented
Quantities are stored in the instrument
Suitable for service and maintenance on air conditioning and refrigeration systems, and heat pumps
Printout on site with optional Testo IR printer
High quality sensors measure high and low pressure and temperature.
Pressure probes temperature compensated
Calculation of super heating and sub cooling in real time.
Display and sight glass illumination
30 refrigerants are stored internally
4 way valve block with sight glass
4 temperature probe connections
Wireless temperature measurement up to 9.6 feet line of sight
30 refrigerants updatable via the internet free of charge
60,000 readings can be stored using the EasyKool software
Extensive range of accessories can be connected

Testo 556 1 Technical Data
Operating temperature	-20 degrees C to + 60 degrees C
Storage temperature	-20 degrees C to + 60 degrees C
Display	LCD
Battery life	40 hours without illumination
Dimensions	10 1/4 x 5 1/8 x 2 3/4 inches
Weight	3 pounds
Pressure media	CFC, HFC, N, H2O, CO2, 2 stainless steel versions: NH3
Protection class	IP 54
Low pressure (LP) High pressure (HP)	25/50 barrelrel
Overload (LP/HP)	40/100 bar
Accuracy	� 0.5 percent of full scale value � 1 digit Class 0.5
Connections	3x7/16 inches � UNF+1x 5/8 inches � UNF
Vacuum	0 to 200hPaabs
Overload vacuum	3bar/sensor protected from high pressures
Temperature
Measuring range	- 50 to + 200 degrees C
Accuracy	Pt 100 class B � (0.3 + 0.005 tl)
Resolution	0.1 degree C
Probe connections	1x plug in
Refrigerants in the instrument	30 further refrigerants can be downloaded free of charge from the Testo homepage using the software
Documentation
Data store in instrument	60,000 readings

Refrigerants permanently stored in instruments
R12	R403B	R414b*
R1270	R404A	R417A
R134A	R406a*	R422a*
R22	R407A	R500
R33	R407B	R502
R290	R407C	R507
R401A	R407D	R508**
R401B	R408A	R717**
R401C	R409A	R723**
R402A	R410A	R744
R402B	R413A	R718
* only testo 523 / 556 1 / 560 1 (brass)
** only testo 556 2 / 560 2 (stainless steel)
In the case of testo 556 and testo 560, additional refrigerants can be downloaded free of charge using the Testo website and our Easy Kool software.