MK 4000 Series Self Propelled Concrete Saw

Ergonomic joystick enables 1 hand control of cutting depth and traverse
Quick release, auto latching bayonet mount blade guard
Enclosed blade shaft
Oil bath lubrication system
Solid steel 3 position adjustable handle bars
Garden hose style connector blade guard for quick disconnecting
Engine tachometer
Fuel level guage
Hour meter
Indicator lights for cylinder head temperature, oil pressure, low battery voltage, headlight, and parking brake
Blade protection system turns off engine while wet cutting if water pressure drops
Cut depth indicator
Separate valves for wash down spray head and blade guard
Blade can be mounted on right or left side
Blade cooled by guard water distribution system
Lifting bail
Positive depth stop
Removable side and rear panels for quick service
Seven 3VX V belt drive from engine to blade shaft
Electrohydraulic pump raises blade
User adjustable valve for blade lowering rate
Wide front wheel base allows ramp unloading and loading and increases stability
Eaton model 6 Hydrostatic transmission coupled to an MK transaxle
Differential Lock for cutting on slippery surfaces
Saw can be pushed manually by disengaging the transmission
Travel speed 0 to 220 feet per minute forward and 0 to 100 feet per minute reverse
Neutral start switch to prevents starting when transmission is in gear

Model	MK-4024	MK-4030	MK-4036
Engine	Wisconsin (Gas)	Wisconsin (Gas)	Wisconsin (Gas)
Power*	W4-1770	W4-1770	W4-1770
Blade Capacity	24 inches	30 inches	36 inches
Blade RPM	1,900	1,900	1,650
Depth of Cut	9-1/2 inches	12-1/2 inches	15 inches
Weight	1150 pounds (522 kg)	1150 pounds (522 kg)	1150 pounds (522 kg)
Part Number	162465	162466	162467
The 35 HP Wisconsin W4-1770 is a 4 cylinder V-block, gasoline fueled, spark ignited, air cooled engine. It is EPA exempt 35HP or lower. The engine is 1765cc displacement. It features a heavy duty cast iron block and a forged steel crankshaft with tapered roller main bearings.
Model	MK-4024D	MK-4030D	MK-4036D
Engine	Deutz (Diesel)	Deutz (Diesel)	Deutz (Diesel)
Power*	F2L2011	F2L2011	F2L2011
Blade Capacity	24 inches	30 inches	36 inches
Blade RPM	1,800	1,800	1,500
Depth of Cut	9-1/2 inches	12-1/2 inches	15 inches
Weight	1190 pounds (540 kg)	1190 pounds (540 kg)	1190 pounds (540 kg)
Part Number	162468	162469	164946
The 30Hp Deutz F2L2011 is a 2 cylinder in-line, diesel fueled, naturally aspirated engine. It features integrated oil cooling complete with heat exchanger. The engine meets current EPA tier II requirements although it is EPA exempt (35hp or under). It is a 1550cc displacement overhead valve engine with low noise emissions.

General Specifications
Arbor	1 inch with 3/8 inch Drive Pin
Fuel Capacity	6.75 Gallons
Travel Speed	0-220 FPM Forward, 0-100 FPM Reverse
Starting System	Electric
Height	59 inches (1,499)
Minimum Saw Length	56 inches (1,422 millimeters)
Maximum Overall Length	100 inches (2,540 millimeters)
Handle Extension	22 inches (559 millimeters)
Maximum Pointer Extension	20 inches (508 millimeters)
Frame Width	27 inches (686 millimeters)
Frame Length	42 inches (1,067 millimeters)
Saw Width	34 inches (864 millimeters)
Outside to Outside Wheel Width - Front	23-3/4 inches (603 millimeters)
Outside to Outside Wheel Width - Rear	27-3/4 inches (705 millimeters)
Blade to Wall	1-7/8 inches (48 millimeters)
Wheel Base Length	20 inches (508 millimeters)
Maximum Overall Height (Pointer Up)	49 inches (1,245 millimeters)