Ideal Qualifiers SIGNALTEK™ Cable Performance Tester

SIGNALTEK™ provides a technically innovative method to test and document performance of voice, data, video, and VoIP applications for cabling installers and network technicians. It tests the link's ability to support application by transmitting Ethernet packets on the wire and measuring the link performance according to IEEE 802.3ab Gigabit Ethernet standard. By monitoring transmitted and received data packets, it can report the BERT (Bit Error Rate Test) for the link. It uses the latest generation of Gigabit Ethernet technology to provide the best performance to this new class of testers.

(Scroll down for More Specifications and Information below product listings)

Brochure

SIGNALTEK™-FO Multimedia Brochure - (PDF - 679KB)

Documentation

SIGNALTEK™ Instructions (English) - (PDF - 1261KB)

SIGNALTEK™ Printer List - (PDF - 52KB)

Service and Repair FAQs - (PDF - 57KB)

Products (Total Items: 7)

Ideal 33-981 33981 SIGNALTEK-FO with 2 850nm Modules

0 Review(s)

Your Price: Contact for Price (877) 207-1244

Ideal 33-982 33 982 SIGNALTEK-FO w/2 13X0nm Modules

0 Review(s)

Your Price: Contact for Price (877) 207-1244

Ideal 33-983 33983 SIGNALTEK-FO w/2 850nm Modules & 2 13X0nm Modules

0 Review(s)

Your Price: Contact for Price (877) 207-1244

Ideal 33-987 33987 SIGNALTEK-FO Fiber Ready, No Modules

0 Review(s)

Your Price: Contact for Price (877) 207-1244

Ideal SFP-850 SFP850 Pair of 850nm SFP Modules

0 Review(s)

Your Price: $483.23

Ideal SFP-13X0 Pair of 13X0nm SFP Modules

0 Review(s)

Your Price: $966.46

Ideal 4010-00-0136 Signaltek Universal (120-240V) AC-DC Power Adapter

0 Review(s)

Your Price: $33.94

Ports/Connections

USB A/B, DC power input
Shielded RJ-45 Port :Supports 10/100/1000Mbps Ethernet connections
Small Form-factor Pluggable (SFP): Supports SFP modules sourced through IDEAL Industries in 850nm and 1300nm wavelengths, 1000Mbps Ethernet

SFP-850 – 850nm Module

Class 1 Laser EN60825-1
Compatible fiber types: 50/125 µm or 62.5/125 µm graded index multimode fiber
Power Output (dBm): -9.5min, -3max
Receiver Power Range (dBm): 0 to -20
Max Link Length: 550m (1800ft) on 50/125 µm fiber; 300m (985ft) on 62.5/125 µm fiber
Operating Temperature: -10 to 85°C (14 to 185°F), 85%RH non condensing

SFP-13X0 – 1300nm Module

Class 1 Laser EN60825-1
Compatible fiber types: 50/125 µm or 62.5/125 µm graded index multimode fiber and 9/125mm step index single mode fiber
Power Output (dBm): -9min, -2.5max
Receiver Power Range (dBm): 0 to -22
Max Link Length: 550m (1800ft) on 50/125 µm fiber; 300m (985ft) on 62.5/125 µm fiber; 10km (6.2mi) on 9/125 µm fiber
Operating Temperature: -10 to 85°C (14 to 185°F), 85%RH non condensing

Length Measurement

RJ-45 Port: TDR length measurement of 1-4 pair cables to 140m/460ft
SFP Port: No length measurement of fiber optic cables Bert Error Rate Measurements

Bert Error Rate Measurements

Copper: 10/100/1000Mbps. Error rates tested to IEEE 802.3ab standard
Fiber: 1000Mbps. Error rates tested to IEEE 802.3ab standard.

Battery Life: Standard AA Alkaline Batteries

Copper Testing: Approx 15 hours @ 22 tests per hour (45s Autotest)
Fiber Testing: Recommend use of AC adapters when testing fiber

Gigabit Performance Testing - Know the true performance of the Network

Easy to read Pass/Fail performance reports that can be Stored and Printed for documentation

Selectable Performance Testing Qualify performance of Data, Voice over IP, and IP Video applications

Performs Gigabit Ethernet link establishment in 10 seconds

Data Monitoring to detect intermittent network problems

Smart Autotest Function detects presence of SIGNALTEK remote, active network device or open ended cable & automatically runs appropriate test suite

Save time using the remote to perform 10/100 or Gigabit service detection AND initiate an Autotest when main unit is connected

Configure multiple target IP addresses for pinging several network devices to ensure communications with servers, printers, IP cameras, home automation controls, etc.

Offers network interrogation tools such as link establishment, port LED blink and ping over active copper and fiber networks

Exceeds 100m measurement distance required by IEEE 802.3ab gigabit Ethernet standard

Brilliant high-resolution color display visible in any lighting condition

Maximum coverage with a full 2 year warranty

Get 30 hours of testing with readily available AA batteries

Wiremap faults easily with selectable 568 A/B color coding

TDR to accurately measure length and locate shorts and opens