Ideal Industries LANTEK LAN Network cable certifier LANTEK6B

Ideal Industries LANTEK 6 LAN Network Cable Certifier - The industry's most capable CAT 6 / ISO E hybrid copper / fiber certifier, testing applications up to 350MHz, well beyond CAT 6 / ISO E draft specifications.

The Ideal Industries LANTEK 6 performs full Category 6/ISO E Autotest with graphs in approximately 25 seconds. The LANTEK 6 is fully upgradeable to LANTEK 7, protecting your investment and giving you the maximum flexibility in meeting your evolving network cable certification needs.

The Ideal Industries LANTEK 6 LAN network cable certifier utilizes advanced link adapter method to reduce cost of ownership. Ideal Industries LANTEK 6 comes with a pair of Category 6/ISO E channel adapters that fit into the case of the unit and are locked into place. This creates a stable and repeatable testing platform while eliminating bulky adapters. By simply plugging in a Category 6 / ISO E reference patch cord to the channel adapter, you can now perform CAT 6 / ISO E permanent link testing. Should the plug ever wear out, simply replace the patch cord rather than the entire assembly reducing lifetime ownership cost.

The Ideal Industries LANTEK 6 LAN network cable certifier comes standard with all the items necessary to certify your job and create certification reports including: Display Unit (with battery); Remote Unit (with battery), LANTEK Reporter Software; Serial and USB Cables; two AC Wall Adapters; two Talksets; two CAT 6 Channel Adapters; two CAT 6 Reference Patch Cords; soft Carry Case; User Manual; Quick Start Guide; and Registration Card.

Ideal Industries LANTEK 6 LAN Network Cable Certifier Highlights

¦DUALmode Testing to save Time: Reports channel and permanent

¦link test results simultaneously

¦2 PCMCIA Expansion Slots

¦USB/Serial Port

¦Copper TDR

¦CAT6 Test Storage with Graphs

 

¦Talk over Fiber & Copper (Full Duplex)

¦Display Screen on Remote

¦Troubleshooting Tone Generator on Remote

¦Accuracy Level III/IIIe (Draft)/IV (LANTEK6/6A/7G) verified by ETL

¦Test with Patchcords toSave Money: Performs CAT5e/6/6a*/ISO-D/E/Ea

testing with standard patchords to reach the lowest cost of ownership

¦The Industries first Certifier designed specifically to support the

emerging Category 6a* cabling standard

¦Certifies to 350MHz to support 10 gigabit ethernet (10GbE) applications

¦Includes new high performance adapters that support channel and

permanent link certification of TIA5e/6/6a* and ISO D/E/Ea UTP and

STP cabling

¦Meets proposed Level IIIe accuracy requirements

¦Independently verified by ETL for baseline, channel and permanent

link accuracy

¦Supports CAT7 & ISO-F*

¦Fiber Loss Measurement (FIBERTEK)**

¦Fiber Distance to Break (TRACETEK)**

¦External Rapid Battery Charger& Extra Batteries**

¦Standard External Compact Flash Memory**

 

*upgradable

**optional