Fluke TiR4FT TiR 4 Infrared Thermal Imaging Camera / Imager  Call for current Fluke pricing and the Free Fluke 971 Moisture / Humidity Meter promotion with purchase of select FLIR and Fluke thermal imagers.   Designed for professionals demanding the best solutions for building diagnostic applications. All Fluke TiR Series models include the innovative IR-Fusion Technology to assist you to better pinpoint building problems. IR-Fusion captures both a visual (or visible light) image and an infrared image and fuses them together - doesn't just overlay the image. It alligns the two on the imager for a more accurate view at any distance.   Roofing Surveys Detect wet insulation in flat-roof systems quickly and efficiently. Find damaged portions of the roofing structure and repair or replace before the entire roof is contaminated. Energy Audits Perform infrared energy audits for residential and commercial applications. Increase the thermal efficiency of a home or building by scanning for thermal heat loss and cool infiltration or exfiltration , moisture invasion, concrete integrity and heat ventilation problems. Moisture/Restoration Accurately detect moisture issues located behind exterior and interior walls, in ceilings or under carpet-covered floors. Mold Remediation Control mold by finding unknown sources of moisture that would otherwise go undetected. Infrared scanning is the fastest most efficient way to provide 100% moisture detection coverage   Typical thermal imaging building applications: Thermal imaging is an efficient, non-destructive testing method to detect (potential) problem areas. Moisture intrusion in roof systems, walls, flooring, ceilings and other building areas Leaks in water pipes, buried steam lines, water lines or underground heating systems and sprinkler systems Missing or inadequate insulation areas Heat or cooling loss, HVAC/R problem areas Connection problems in low voltage electrical systems Termite and pest issues Construction failure areas   IR Fusion Technology   View images using both Infrared and visual (visible light) images fused together communicating critical information faster and easier, as traditional infrared images are no longer enough. Patent-pending IR-Fusion Technology, pioneered by Fluke, simultaneously captures a digital photo in addition to the infrared image and fuses it together taking the mystery out of IR image analysis. Images enhanced with IR Fusion help identify and locate problems enabling repairs to be done right the first time. IR-Fusion images are also extremely effective when communicating findings to a customer, insurance company or the person who will be performing the repairs.

TiR 4 FT Specifications: Imaging performance VOx FPA Detector Size 320 x 240     Detector Frame Rate (Hz)* 60     Field of View (FOV) 23º horizontal x 17º vertical Spatial Resolution (IFOV) 1.30 mrad     Min. Focus Distance 0.15 m Thermal Sensitivity (NETD) ≤0.05 °C at 30 °C - (50mK)     Focus Smart Focus: one finger continuous focus Temperature Performance Calibrated temperature range -20 ˚C to 100 ˚C (-4 ºF to 212 ºF) Fully radiometric 76,800 calibrated pixels Accuracy ±2 °C or 2% Emissivity correction 0.1 to 1.0 (0.01 increments) Measurement Modes Centerpoint, center box (area min/max, average) moveable spots/boxes, user defined field/text annotations, isotherms, automatic hot and cold point detection, visible color alarm above and below. TiR3 - Centerpoint, center box (area min/max) Image Presentation Digital display 5" LCD Video output RS170 EIA/NTSC or CCIR/PAL composite video Palettes Grayscale, grayscale inverted, blue red, high contrast, hot metal, ironbow, amber, amber inverted LCD Backlight Sunlight readable color LCD Other Sofware included SmartView Storage medium > 1000 IR images on compact flash card (512 MB) Flash Memory Laser pointer Yes Built-in visible light camera Yes IR-Fusion Yes IR/Visible Alarm on camera Yes Flash and torch light Yes 180º articulating lens Yes Optional lenses Yes Windows CE based menu Yes AutoCapture Yes On board analysis functions Yes User defined text annotations Yes Warranty 2 years Optional Lenses 54 mm telephoto lens High precision germanium lens Field of view (FOV) 9 degree horizontal x 6 degree vertical Spatial resolution (IFOV) 0.94 mrad Min focus distance 0.6 m     10.5 mm wide angle lens High precision germanium lens Field of View (FOV) 42 degree horizontal x 32 degree vertical Spatial resolution (IFOV) 2.45 mrad     Min focus distance 0.3 m 7.5 Hz models are available in some geographies. Check with your Fluke sales representative for additional information. Mechanical & General Specifications Operating Temperature   -10° C to +50° C (14° F to 122° F) Storage Temperature   -40° C to +70° C (-40° C to 158° F) Relative Humidity   Operating and storage 10% to 95%, non-condensing Water and Dust Resistant:   IP54 Weight   1.95 kg (4.3 lbs)   (including batteries) Camera Size (HxWxD)   162 x 262 x 101 mm (6.5" x 10.5" x 4.0") * Specifications with standard 20 mm Germanium lens