The Fluke 62 Mini digital thermometer is the ideal introduction to infrared thermometers for the professional. The 62 Mini IR Thermometer offers reliable and fast surface temperature measurements. This portable infrared thermometer allows technicians to diagnose ventilation and heating problems and monitor the temperature of electrical panels and electrical motors without contact. Durable enough for industrial environments with a protective rubber boot, the Fluke 62 also comes with a nylon belt holster so you’re always ready to make quick measurements.

62 Mini IR Thermometer Features

Single point laser sighting
Best accuracy in its class of ±1 percent of reading
7 second temperature hold
Dual display shows simultaneous MAX and current measurements
Backlit display
Comfortable ergonomic handle with protective rubber boot
Holster attaches to belt
Robust award winning design
Wide temperature range from -30 to 500 degrees Celsius (–20 to 932 degrees Fahrenheit)

Fluke 62 Includes

Battery
Soft carrying case
Quick Start Guide

The Fluke T5 Electrical Tester enables you to check current, continuity and voltage with one compact instrument. With the T5, all you have to do is select current, ohms, or volts and the tester automatically does the rest. OpenJaw current allows you to check current up to 100 Amps without breaking the circuit. The durable test leads are stored conveniently in the rear of the tester, so its easy to carry the T5 in your tool pouch. The detachable SlimReach test probes are customized for national electrical standards. The test leads accept optional accessories such as specialty probes and clips. The optional H5 holster is made to clip the T5 onto your belt.

T5-600 Electrical Tester Features

Automatically measures AC and DC volts with precise digital resolution
Displays resistance to 1000 Ohms
Accurate and easy OpenJaw current measurement
Continuity beeper
Compact design with probe storage
Durable enough to withstand a 10 foot drop
Detachable SlimReach probe tips are customized for national electrical standards
Test leads accept accessory test clips
Available in 600 and 1000 Volt models
Stays connected longer than solenoid type tester
Auto off mode

Safety Conformance

All inputs of the T5-600 are protected to EN61010-1 CAT III 600V and the T5-1000 to EN61010-1 1000V CAT III rating. UL, CSA and VDE listed.

The Fluke VoltAlert AC non contact voltage testers are very simple to use. Touch the tip to a supply cord, outlet, or terminal strip. When the unit beeps and the tip glows red, you know there’s voltage present. Maintenance, Electricians, service, homeowners, and safety personnel can quickly and easily test for energized circuits.

VoltAlert AC Non Contact Voltage Tester Features

Voltbeat technology and continuous self test
Beeper sounds and tip glows when voltage is detected
CAT IV 1000 V for added protection
Expanded range: 90 V to 1000 V AC or 200 V to 1000 V AC depending on model
20 V to 90 V AC control circuit model also available
2 year warranty

62 Specifications

Measurement range

-30 °C to 500 °C (-20 °F to 932 °F)

Accuracy

	10 ºC to 30 ºC (50 ºF to 86 ºF): ± 1 ºC (2 ºF)
	Outside 10 ºC to 30 ºC (50 ºF to 86 ºF): ± 1.5 ºC (3 ºF) or ± 1.5 % of reading, whichever is greater

Repeatability

±0.5 % of reading or < ±1 °C (±2 °F), whichever is greater

Emissivity

Preset 0.95

Response time

< 500 mSec

Distance to spot size

10:1 calculated @ 80 % energy

Spectral range

6.5–18 microns thermopile detector

Display resolution

0.2 °C (0.5 °F)

Display hold (7 seconds)

•

LCD backlit

•

Temperature display

°C or °F selectable

Ambient operating range

0 to 50 °C (32 to 120 °F)

Relative humidity

10-90 % RH non-condensing, @ up to 30 °C (86 °F)

Typical distance to target (spot)

Up to 2 m (6 ft)

Laser class II

Single offset laser

Weight/dimensions

200 g (7 oz); 152 x 101 x 38 mm (6 x 4 x 1.5 in)

Power

9 V Alkaline battery (included)

Battery life (alkaline)

12 hours

Storage temperature

-20 ºC to 65 ºC (-4 ºF to 150 ºF) without battery

Options/accessories

Includes protective boot and storage holster

Warranty:

2 years (conditional)

T5 Specifications

Continuity beeper

Threshold: On at <25 Ω, off at >400 Ω

Volts indicator LED

Threshold: Guaranteed on by 30V ac

T5 Environmental Specifications

Operating Temperature

-10 °C to 50 °C

Storage Temperature

-30 °C to 60 °C

Humidity (Without Condensation)

0% to 95% (5 °C to 30 °C)

0% to 75% (30 °C to 40 °C)

0% to 45% (40 °C to 50 °C)

Dust/water resistance

Yes

Operating Altitude

2000 meters max

Temperature Coefficient

0.1 x (specified accuracy)/degree C (<18 °C or >28 °C)

T5 Safety Specifications

Overvoltage category

T5-600: 600V ac/dc, CAT III

T5-1000: 1000V ac/dc, CAT III
600V ac/dc, CAT IV

Agency Approvals

UL, CSA, and VDE

Maximum voltage

between any terminal and earth ground

T5 Mechanical & General Specifications

Size

30.5 x 51 x 203 mm

Weight

300g

Warranty

2 years

Battery Life

200 hour zinc chloride, 400 hour alkaline

Battery type

Two AA zinc chloride

Low battery indicator

Yes

Current sensor opening

12.9 mm

Calibration cycle

1 year

Test leads

Type: Heavy duty, flexible leads rated for 1000V use.

Field replaceable leads terminate in male shrouded banana plugs

Probes: One red, one black. of two tip

Detachable Slim-ReachT probe tips in one

Styles: TP1 Slim Reach Test Probes

1 AC II Specifications

Operating principle

Senses the steady state electrostatic ﬁeld produced by ac voltage through insulation without requiring contact to the bare conductor. A red glow at the tip and a beeping noise (if not switched OFF) indicates the presence of voltage.

Voltage sensing ranges

Nominally, 90 V AC to 1000 V AC or 200 V AC to 1000 V AC depending on model, 45 Hz to 405 Hz; also a 20 V to 90 V control circuit model

Detector tip style

Blade or round, depending on model

Light source

One high intensity red LED

Agency Approvals

c CSA us, CE, TUV, C-Tick

Safety Rating

1000 V, CAT IV

IP Rating

IP 40

Operating Temperature

-10 °C to 50 °C

Operating humidity ranges

0 % to 95 % (0 °C to 30 °C)

0 % to 75 % (30 °C to 40 °C)

0 % to 45 % (40 °C to 55 °C)

Operating Altitude

3000 meters

Batteries

2 AAA alkaline batteries included