The 87V Ex has all the troubleshooting and measurement functions of the world renowned Fluke 87V. Unlike most other ATEX certified tools, the 87V Ex can be used both outside and inside the hazardous zone (ATEX Zones 1 & 2) without compromising compliance or performance. It also has a built in thermometer with TC probe which further increases your efficiency.

87V-Ex 87 V Ex Intrinsically Safe Industrial MultiMeter Features

ATEX safety rating for use in Ex zone 1 and zone 2
CAT IV 600 V electrical safety rating
Unique function for accurate frequency and voltage measurements on variable speed motor drives
Large display with 2 level backlight
Built in thermometer with probe
True RMS AC current and voltage for precise measurements on non linear signals
4.5 digit mode for precise measurements (20,000 counts)
Measure up to 1000 Volts and 10 A AC/DC
Frequency to 200 kHz and percent duty cycle
Continuity, resistance, and diode test
10,000 μF capacitance range for components and motor caps
Minimum and Maximum-Average recording with Min/Max Alert to capture variations automatically
Auto and manual ranging for maximum flexibility
Analog bargraph for unstable or fast changing signals
Input Alert audible warning for wrong use of input jacks
TL75 test leads
AC72 Alligator Clips
Red Holster
9V battery (installed)
Getting Started Manual
CD with detailed manual

Safety ratings

ATEX safety rating: II 2 G EEx ia IIC T4
Electrical safety rating: EN61010-1 CAT IV 600 V and CAT III, 1000 V

General Specifications

Voltage DC

Maximum voltage:	1000 V
Accuracy:	� (0.05 % + 1)
Maximum resolution:	10 μV

Voltage AC

Maximum voltage:	1000 V
Accuracy:	� (0.7 % + 2) True-rms
AC bandwidth:	20 kHz
Maximum resolution:	10 μV

Current DC

Maximum amps:	10 A (20 A for 30 seconds maximum)
Amps accuracy:	� (0.2 % + 2)
Maximum resolution:	0.01 μA

Current AC

Maximum amps:	10 A (20 A for 30 seconds maximum)
Amps accuracy:	� (1.0 % + 2)
Maximum resolution:	True-rms 0.01 μA

Resistance

Maximum resistance:	50 MΩ
Accuracy:	� (0.2 % + 1)
Maximum resolution:	0.01 Ω

Capacitance

Maximum capacitance:	9,999 μF
Accuracy:	� (1 % + 2)
Maximum resolution:	0.001 nF

Frequency

Maximum frequency:	200 kHz
Accuracy:	� (0.005 % + 1)
Maximum resolution:	0.001 Hz

Duty Cycle

Maximum duty cycle:	99.90 %
Accuracy:	� (0.2 % per khz +0.1 %)
Maximum resolution:	0.10 %

Temperature

Range:

-200.0 �C to 1090 �C (-328 �F to 1994 �F) excluding probe

80BK Temperature Probe

Range:	-40.0 �C to 260 �C (-40 �F to 500 �F)
Accuracy:	2.2 �C or 2 % whichever is greater

Conductance

Maximum conductance:	60.00 nS
Accuracy:	� (1.0 % + 10)
Maximum resolution:	0.001 nS

Diode

Range:	3 V
Resolution:	1 mV
Accuracy:	� (2 % + 1)

Duty Cycle Range

Accuracy:

Within � (0.2 % per kHz + 0.1 %)

Measurements restriction in Ex-hazardous area

Voltage:	65 V
Current:	5 A

Environmental Specifications

Operating Temperature

-20 �C to +50 �C

Storage Temperature

-40 �C to +60 �C

Humidity (Without Condensation)

0 % to 80 % (0 �C to 35 �C) 0 % to 70 % (35 �C to 50 �C)

Operating Altitude

2000 m

Safety Specifications

Overvoltage category

EN 61010-1 to 1000 V CAT III, 600 V CAT IV

Agency Approvals

CSA, T�V

ATEX certification

Ex II 2 G EEx ia IIC T4

Agency Approvals

ZELM 05 ATEX 0274

Mechanical & General Specifications

Size

201 x 98 x 52 mm (with holster)

Weight

12,5 oz. (355 kg) with holster

Display (Digital)

6000 counts updates 4/sec. 19,999 counts in high-resolution mod

Display (Analog)

32 segments, updates 40/sec.

Warranty

1 year

Battery Life

~400 hours typical without backlight

Shock

1 Meter drop per IEC 61010-1:2001

Vibration

Per MIL-PRF-28800 for a Class 2 instrument