The 717 3000G 3000 PSIG calibrator is lightweight, compact, and easy to carry. With a push button user interface like the multifunction 740 Series Process Calibrators, it is very simple to use. It is dust and splash resistant, EMI tolerant, and has a convenient battery door for fast battery changes.

717 3000G 3000 PSIG Calibrator Includes

Protective Holster with test lead storage
Instructions Sheet
9 Volt alkaline battery
Alligator Clips and Test Leads
NIST traceable calibration data and report

717 3000G 3000 PSIG Calibrator Features

Measure pressure, 0.05 percent of full scale with internal sensor
Measure milliamps with 0.015 percent accuracy and 0.001 mA resolution, while sourcing 24 Volt loop power
Increase pressure range using one of 29 Fluke 700Pxx Pressure Modules
1/8 NPT female pressure fitting
Compatible with non corrosive liquids and gases
Select 11 different engineering units
Max, min, hold, and zero functions
Calibrate P/I instruments with simultaneous current and pressure measurement
Pressure switch test function captures Deadband, reset and set values of a pressure switch
Percent Error calculation of milliamps measurements for quick pass or fail decisions
Long battery life
Holster with test lead storage
Compatible with TPAK magnetic hanging system
New switch test

Measurement Accuracy

Pressure

717 Series
Accuracy:	0.05% full scale
Functions:	Zero, Min, Max, Hold, Damp
	Note Gasses / liquids (non-corrosive)
Fluke 717 3000G
Range:	0 to 3000 PSI, (0 bar to 207 bar, 0 to 20684.27 kPa)
Resolution:	0.1 PSI, 0.01 bar, 1 kPa
Over Pressure:	2 X full scale
Fluke 717 Series with Pressure Modules
Measure Pressure	(via pressure module connector using optional Pressure Modules)
Range:	29 pressure modules, 0-1 inH20 to 10,000 PSI, 2.5 mbar to 700 bar ranges. Over pressure per pressure module specs
Resolution:	Per pressure module specs
Accuracy:	per pressure module specs
Functions:	Zero, Min, Max, Hold, Damp

Current

Range:	0 to 24 mA (-25% to 125%)
Resolution:	0.001 mA
Accuracy:	0.015% + 2 counts

Specifications

Loop Power

Range: 24 V dc

Accuracy: +/- 10%

Note: Drive; 20 mA into 1000 ohms for battery >6.8V; 700 W for battery 5.8 to 6.8 V

Display

Clear 5 digit LCD

Environmental Specifications

Operating Temperature

-10 ºC to 55 ºC

Storage Temperature

-40 ºC to 60 ºC

Humidity (Without Condensation)

95% (10 ºC to 30 ºC)

75% (30 ºC to 40 ºC)

45% (40 ºC to 50 ºC)

35% (50 ºC to 55 ºC)

Operating Altitude

3,000 M max

Safety Specifications

Safety

CSA C22.2 No. 1010.1:1992

Mechanical & General Specifications

Size

201 mm L x 98 mm W x 52 mm (7.93in. L x 3.86in. W X 2.06in.)

Weight

22 oz, approximately 600G with holster

Warranty

3 years

Shock & Vibration

Random, 2G, 5-500 Hz

1m drop test

Battery type

Single 9V battery ANSI/NEDA 1604A or IEC 6LR619V alkaline