The 715 calibrator is lightweight, compact, and easy to carry. With a push button user interface like the multifunction 740 Series Process Calibrators, it is very simple to use. It is dust and splash resistant, EMI tolerant, and has a convenient battery door for fast battery changes.

715 Volt and Milliamp Calibrator Includes

Protective Yellow Holster with Test Lead Storage
Instructions Sheet
9 Volt alkaline battery
Alligator Clips and Test Leads
NIST traceable calibration data and report

715 Volt and Milliamp Calibrator Features

Measure loop current 0 to 20 milliamps, and 4 to 20 milliamp signals with a high precision of 0.015 percent and 1 milliamp resolution
Measure voltage output process signals from transmitters and PLCs
Simulate or source 24 milliamps loop current
Source voltage to 100 millivolts or 10 Volts
24 Volt loop supply with simultaneous current measurement
Enhanced current and voltage measure and source accuracy
Enhanced battery life
250 ohm HART resistor with loop power
Holster with test lead storage
Compatible with the TPAK magnetic hanging system
Linear and step ramp output function
Configurable span and zero settings

Functional specifications

Measure / Source mV

Range:	0 to 200 mV
Resolution:	0.01 mV
Accuracy:	0.015% + 2 counts

Measure / Source V

Range:	0 to 20 V
Resolution:	0.001 V
Accuracy:	0.01% + 2 counts

Measure / Source/ Simulate mA (% of span)

Range:	0 to 24 mA (-25% to 125%)
Resolution:	0.001 mA
Accuracy:	0.01% + 2 counts
	Note: Sink (simulate transmitter) Display mA or % of span

Specifications

Loop Power

Range: 24 V dc

Accuracy: +/- 10%

Note: Drive; 20 mA into 1000 Ω for battery >6.8V; 700 Ω for battery 5.8 to 6.8 V

Display

Clear 5 digit LCD

Environmental Specifications

Operating Temperature

-10�C to 55�C

Storage Temperature

-40�C to 60�C

Humidity (Without Condensation)

95% (10 �C to 30 �C)

75% (30 �C to 40 �C)

45% (40 �C to 50 �C)

35% (50 �C to 55 �C)

Operating Altitude

3,000m max

Safety Specifications

Safety

CSA C22.2 No. 1010.1:1992

Mechanical & General Specifications

Size

187 mm L x 87mm W x 32 mm

(7.93 in. L x 3.86 in. W x 2.06 in D)

Weight

Approx. 330 g

(21 oz)

Warranty

3 years

Shock & Vibration

Random, 2G, 5-500 Hz

1m drop test

Battery type

Single 9V battery ANSI/NEDA 1604A or IEC 6LR619V alkaline