Single handed user interface with detented Quick Click knob
Milliamp measurement, simulation, and sourcing
0.015 percent accuracy
0.001 milliamp resolution
Simultaneous milliamp and percent of span display
Selectable ramp or step outputs
24 Volt Loop supply with milliamp measure including 250Ω HART resistor
0 to 28 VDC measurement to check Loop Voltage
Easy battery replacement without opening the case
Compact case and separate protective holster
3 year warranty
Large display
Simple pushbutton interface
Push button 25 percent steps for quick linearity checks.
0 to 100 percent span check for quick confirmation of zero and span
Selectable slow ramp, fast ramp, and step to provide smooth outputs for loop functional tests and valve slewing.
24 volt internal loop supply in order to read and power a transmitter simultaneously without carrying a Digital Multi Meter.
Single 9 Volt battery
0 to 20 milliamp or 4 to 20 milliamp default start up modes.
Simultaneous milliamp and percent readout for fast, easy interpretation of measurements.
1 �A resolution for milliamp measure , simulate and source.
Measures Volts DC to 28 Volts.
Innovative output adjustment dial with 1 �A and 100 resolution.
HART mode connects 250 Ohm resistor in series with 24 Volt loop for compatibility with HART communicators.

Safety conformance

CSA C22.2 No. 1010.1:1992

Specifications

Current Measurement

Range:	0 to 24 mA
Resolution:	0.001 mA
Accuracy:	0.015% Rdg + 2 LSD

Current Sourcing

Range:	0 to 20 mA or 4 to 20 mA
Accuracy:	0.015% Rdg + 2 LSD
Drive Capability:	1200 Ω; 950 Ω at 20 mA in HART mode

Current Simulation

Range:	0 to 20 mA or 4 to 20 mA
Accuracy:	0.015% Rdg + 2 LSD
Ext. loop voltage requirement:	12-30 V

Loop Power

While measuring mA, 24 V

Voltage measurement

Range:	0 to 28 V DC
Resolution:	1 mV
Accuracy:	0.015% Rdg + 2 LSD

Environmental Specifications

Operating Temperature

-10�C to 55�C

Storage Temperature

-30�C to 60�C

Humidity (Without Condensation)

0 to 90% (0�C to 35�C); 0 to 70% (35�C to 55�C)

Temperature Coefficient

-10�C to 18�C, 28�C to 55�C, �.005% of range per �C

Safety Specifications

Safety

CSA C22.2 No. 1010.1:1992

EMC

EN50082-1:1992 and EN55022:1994 Class B

Maximum voltage

30V

Mechanical & General Specifications

Size

152 x 70 x 41 mm

Weight

224 g (340 g including holster)

Batteries

One 9V battery Alkaline

Warranty

Three years

Shock & Vibration

per MIL-T-28800 for a Class 2 Instrument

Display current and % of span

Yes

Auto step, auto ramp

Yes

Span Check

Yes