The Fluke 62 Mini digital thermometer is the ideal introduction to infrared thermometers for the professional. The 62 Mini IR Thermometer offers reliable and fast surface temperature measurements. This portable infrared thermometer allows technicians to diagnose ventilation and heating problems and monitor the temperature of electrical panels and electrical motors without contact. Durable enough for industrial environments with a protective rubber boot, the Fluke 62 also comes with a nylon belt holster so you�re always ready to make quick measurements.

62 Mini IR Thermometer Features

Single point laser sighting
Best accuracy in its class of �1 percent of reading
7 second temperature hold
Dual display shows simultaneous MAX and current measurements
Backlit display
Comfortable ergonomic handle with protective rubber boot
Holster attaches to belt
Robust award winning design
Wide temperature range from -30 to 500 degrees Celsius (�20 to 932 degrees Fahrenheit)

The Fluke VoltAlert AC non contact voltage testers are very simple to use. Touch the tip to a supply cord, outlet, or terminal strip. When the unit beeps and the tip glows red, you know there�s voltage present. Maintenance, Electricians, service, homeowners, and safety personnel can quickly and easily test for energized circuits.

1AC ll VoltAlert AC Non Contact Voltage Tester Features

Voltbeat technology and continuous self test
Beeper sounds and tip glows when voltage is detected
CAT IV 1000 V for added protection
Expanded range: 90 V to 1000 V AC or 200 V to 1000 V AC depending on model
20 V to 90 V AC control circuit model also available
2 year warranty

62 Specifications

Measurement range

-30 �C to 500 �C (-20 �F to 932 �F)

Accuracy

	10 �C to 30 �C (50 �F to 86 �F): � 1 �C (2 �F)
	Outside 10 �C to 30 �C (50 �F to 86 �F): � 1.5 �C (3 �F) or � 1.5 % of reading, whichever is greater

Repeatability

�0.5 % of reading or < �1 �C (�2 �F), whichever is greater

Emissivity

Preset 0.95

Response time

< 500 mSec

Distance to spot size

10:1 calculated @ 80 % energy

Spectral range

6.5�18 microns thermopile detector

Display resolution

0.2 �C (0.5 �F)

Display hold (7 seconds)

�

LCD backlit

�

Temperature display

�C or �F selectable

Ambient operating range

0 to 50 �C (32 to 120 �F)

Relative humidity

10-90 % RH non-condensing, @ up to 30 �C (86 �F)

Typical distance to target (spot)

Up to 2 m (6 ft)

Laser class II

Single offset laser

Weight/dimensions

200 g (7 oz); 152 x 101 x 38 mm (6 x 4 x 1.5 in)

Power

9 V Alkaline battery (included)

Battery life (alkaline)

12 hours

Storage temperature

-20 �C to 65 �C (-4 �F to 150 �F) without battery

Options/accessories

Includes protective boot and storage holster

Warranty:

2 years (conditional)

1 AC II Specifications

Operating principle

Senses the steady state electrostatic ﬁeld produced by ac voltage through insulation without requiring contact to the bare conductor. A red glow at the tip and a beeping noise (if not switched OFF) indicates the presence of voltage.

Voltage sensing ranges

Nominally, 90 V AC to 1000 V AC or 200 V AC to 1000 V AC depending on model, 45 Hz to 405 Hz; also a 20 V to 90 V control circuit model

Detector tip style

Blade or round, depending on model

Light source

One high intensity red LED

Agency Approvals

c CSA us, CE, TUV, C-Tick

Safety Rating

1000 V, CAT IV

IP Rating

IP 40

Operating Temperature

-10 �C to 50 �C

Operating humidity ranges

0 % to 95 % (0 �C to 30 �C)

0 % to 75 % (30 �C to 40 �C)

0 % to 45 % (40 �C to 55 �C)

Operating Altitude

3000 meters

Batteries

2 AAA alkaline batteries included