Fluke 62/322/1AC 62 322 1AC IR Thermometer Clamp Meter And Voltage Detector Kit

This Fluke 62/322/1AC kit was developed to help HVAC technicians and electricians solve problems faster.

First test for overheated electrical devices using an IR thermometer, then use electrical test instruments to diagnose the problem.

The Fluke 322 is designed to verify the presence of AC voltage, load current, continuity of circuits, contacts switches, and fuses. These compact and durable clamp meters are perectly suited for current measurements up to 400 Amps in tight cable compartments. The 322 also offers DC voltage measurements and has a higher resolution for loads below 40 Amps.

322 AC Clamp Meter Features

• New compact size fits easily into tight places
• Precise measurements with 1.8 percent basic accuracy
• Resolution up to 0.01 Amps and 0.1 Volts
• Measures AC current to 400 Amps
• Measures AC volts to 600 Volts
• Measures DC volts to 600 Volts
• Resistance measurement to 400 Ohms
• Continuity for fast checking of shorts
• Low battery indicator
• Display hold function
• 2 year warranty  

Safety Conformance

All inputs are protected to EN61010-1, 600 V CAT III, UL, CSA and TV listed.

322 Clamp Meter Includes

• 2 AAA Alkaline batteries
• Instruction card
• Safety information sheet
• Soft carrying case
• Test leads 

The Fluke 62 Mini digital thermometer is the ideal introduction to infrared thermometers for the professional. The 62 Mini IR Thermometer offers reliable and fast surface temperature measurements. This portable infrared thermometer allows technicians to diagnose ventilation and heating problems and monitor the temperature of electrical panels and electrical motors without contact. Durable enough for industrial environments with a protective rubber boot, the Fluke 62 also comes with a nylon belt holster so youre always ready to make quick measurements.

62 Mini IR Thermometer Features

• Single point laser sighting
• Best accuracy in its class of 1 percent of reading
• 7 second temperature hold
• Dual display shows simultaneous MAX and current measurements
• Backlit display
• Comfortable ergonomic handle with protective rubber boot
• Holster attaches to belt
• Robust award winning design
• Wide temperature range from -30 to 500 degrees Celsius (20 to 932 degrees Fahrenheit)  

Fluke 62 Includes

• Battery
• Soft carrying case
• Quick Start Guide  

The Fluke VoltAlert AC non contact voltage testers are very simple to use. Touch the tip to a supply cord, outlet, or terminal strip. When the unit beeps and the tip glows red, you know theres voltage present. Maintenance, Electricians, service, homeowners, and safety personnel can quickly and easily test for energized circuits.

• Voltbeat technology and continuous self test
• Beeper sounds and tip glows when voltage is detected
• CAT IV 1000 V for added protection
• Expanded range: 90 V to 1000 V AC or 200 V to 1000 V AC depending on model
• 20 V to 90 V AC control circuit model also available
• 2 year warranty 

322 Environmental Specifications
Operating Temperature	-10C to +50C
Storage Temperature	-30 C to +60 C
Operating Altitude	2,000 meters
Temperature De-rating	Add 0.1 x specified accuracy for each C above 28C or below 18C

322 Safety Specifications
Safety Rating	IEC 1010-2-032, 600V CAT III

322 Mechanical & General Specifications
Size	190 x 63 x 35 mm
Weight	230 g
Warranty	Two years
Battery Life	100 hours typical (2 AAA carbon zinc)
Jaw Opening	25 mm

62 Specifications
Measurement range	-30 C to 500 C (-20 F to 932 F)
Accuracy	10 C to 30 C (50 F to 86 F): 1 C (2 F)    Outside 10 C to 30 C (50 F to 86 F): 1.5 C (3 F) or 1.5 % of reading, whichever is greater
Repeatability	0.5 % of reading or < 1 C (2 F), whichever is greater
Emissivity	Preset 0.95
Response time	< 500 mSec
Distance to spot size	10:1 calculated @ 80 % energy
Spectral range	6.518 microns thermopile detector
Display resolution	0.2 C (0.5 F)
Display hold (7 seconds)
LCD backlit
Temperature display	C or F selectable
Ambient operating range	0 to 50 C (32 to 120 F)
Relative humidity	10-90 % RH non-condensing, @ up to 30 C (86 F)
Typical distance to target (spot)	Up to 2 m (6 ft)
Laser class II	Single offset laser
Weight/dimensions	200 g (7 oz); 152 x 101 x 38 mm (6 x 4 x 1.5 in)
Power	9 V Alkaline battery (included)
Battery life (alkaline)	12 hours
Storage temperature	-20 C to 65 C (-4 F to 150 F) without battery
Options/accessories	Includes protective boot and storage holster
Warranty:	2 years (conditional)

1 AC II Specifications
Operating principle	Senses the steady state electrostatic field produced by ac voltage through insulation without requiring contact to the bare conductor. A red glow at the tip and a beeping noise (if not switched OFF) indicates the presence of voltage.
Voltage sensing ranges	Nominally, 90 V AC to 1000 V AC or 200 V AC to 1000 V AC depending on model, 45 Hz to 405 Hz; also a 20 V to 90 V control circuit model
Detector tip style	Blade or round, depending on model
Light source	One high intensity red LED
Agency Approvals	c CSA us, CE, TUV, C-Tick
Safety Rating	1000 V, CAT IV
IP Rating	IP 40
Operating Temperature	-10 C to 50 C
Operating humidity ranges	0 % to 95 %  (0 C to 30 C) 0 % to 75 %  (30 C to 40 C) 0 % to 45 %  (40 C to 55 C)
Operating Altitude	3000 meters
Batteries	2 AAA alkaline batteries included