The 113 Utility Multimeter enables utility users to easily do basic reconnect and meter set testing. The 113 is easy to use and can be used to repair almost any electrical problem. Significant improvements have been made with the 113 over the original Fluke 7-600, as well as other utility multimeters. Utilizing the Fluke VCHEK LoZ low impedance measurement function, simultaneous testing for voltage or continuity is a breeze. You can also perform diode testing with both manual and auto ranging capabilities. With many important features such as a large backlit display, conformance to the latest safety standards, the Fluke 113 is a neccessity for the utility users aresenal.

The Fluke 113 True RMS Utility Multimeter Features

VCHEK LoZ low impedance measurement function allows simultaneous testing for continuity or voltage
True RMS for accurate ac measurements on non linear loads
Large backlit display
Min/Max function for signal fluctuation recording
Diode test for testing general purpose silicon, germanium, and power diodes
Holster with probe holders
Manual and Auto ranging enhances user functionality
Meets Measurement Category CAT III 600 V and Category IV 300 V standards for a higher level of safety
Hands free flexibility using the optional TPAK magnetic hanger

Specifications

VCHECK ^1,2

Range	6.000 V
	60.00 V
	600.0 V
Resolution	0.001 V
	0.01 V
	0.1 V
Accuracy	DC, 45 to 500 Hz:2.0 % + 3
	500 Hz to 1 kHz: 4.0 % + 3

Diode test ³

Range	2.000 V
Resolution	0.001 V
Accuracy	2.0 % + 3

Continuity³

Range
Resolution
Accuracy	Beeper on < 20 Ω, off > 250 Ω; detects opens or shorts of 500 μs or longer

Ω³

Range	600.0 Ω
	6.000 kΩ
	60.00 kΩ
Resolution	0.1 Ω
	0.001 kΩ
	0.01 kΩ
Accuracy	0.9 % + 2
	0.9 % + 1
	0.9 % + 1

Capacitance³

Range	1000 nF
	10.00 μF
	100.0 μF
	9999 μF
Resolution	1 nF
	0.01 μF
	0.1 μF
	1 μF
Accuracy	1.9 % + 2
	1.9 % + 2
	1.9 % + 2
	100 μF - 1000 μF: 1.9 % + 2
	> 1000 μF: 5 % + 20

Notes:
¹ All VChek voltage ranges are specified from 60 counts to 100 % of range. Because inputs below 60 counts are not specified, it is possible and normal for this and other true-rms meters to display non-zero readings when the test leads are disconnected from a circuit or are shorted together.
² Crest factor of ≤ 3 at 4000 counts, decreasing linearly to 1.5 at full scale.
³ After measuring voltage, a wait time of 1 minute is required to maintain accuracy of ohms, capacitance, diode test, and continuity.

Specifications

Maximum voltage between any terminal and earth ground

600 V

Display

3 3/4-digits, 6000 counts, updates 4/sec

Operating temperature

-10 �C to 50 �C (14 �F to 122 �F)

Storage temperature

-40 �C to 60 �C (-22 �F to 140 �F)

Temperature coefficient

0.1 x (specified accuracy)/�C (< 18 �C or > 28 �C)

Operating altitude

2,000 m

Storage altitude

10,000 m

Relative humidity

95 % to 30 �C

75 % to 40 �C

45 % to 50 �C

Battery type

9 Volt Alkaline, ANSI 1604A / IEC 6F22

Battery life

Alkaline: 300 hours typical, without backlight

Shock

1 Meter drop per IEC 61010-1-2001

Vibration

Per MIL-PRF-28800 for Class 2 instrument

Size (HxWxL)

167.1 mm X 85.1 mm X 46.0 mm (6.58 in X 3.35 in X 1.81 in)

Weight

13.0 oz (404 g)

<