Positioning Belts - Safewaze Fall Protection Work positioning belts and lanyards are designed to secure the user safely in position at the point of work. They are not designed to arrest a free fall. Use a harness if a risk of a free fall is present. ANSI approved body device designed for fall protection, which by reason of its attachment to a lanyard and safety line or structure will limit a fall to 6' or less. A full harness is the most widely preferred device for fall prevention in lift devices. Safety belts can be used as �positioning devices� in the type of lift equipment, where employees will stand with both feet on the floor of the bucket or platform. These are also an acceptable alternative to harnesses only in this application. Aerial lifts have passive fall protection systems, such as bucket or rail systems, where the purpose of the belt is to keep the occupant(s) in the device upon impact, not to keep them from falling out of it. Body belt (safety belt) means a strap with purpose both for securing it around the waist area and for securing it to a deceleration device, lifeline, or lanyard . Use body belts for inspection work, construction and demolition, maintenance, oil production, and any other activities where you need to be restrained from a leading edge or where there is NO possibility of a vertical free fall. Also, it is easy to add a body belt to most harnesses for added back support and versatility. Remember, NEVER use body belts in situations where there is any chance of a free fall! Warning! This product is to be used for positioning only, unless it is used in conjunction with a shock absorber and full body harness.
Positioning Lanyards - Safewaze Fall Protection Restraint lanyards are primarily used for travel restriction and work positioning. Lanyards for travel restriction are used to restrain a worker from reaching a fall hazard. Lanyards for work positioning are used for stabilizing a worker at an elevation. They can be ordered in adjustable lengths or in fixed lengths . Each lanyard comes with a zinc plated, self locking, forged steel snaphook attached on both ends. Meets ANSI and OSHA standards. Warning! This product is to be used for positioning only, unless it is used in conjunction with a shock absorber and full body harness. Safewaze PPE Fall Protection - Industrial Anchors Features: 2 double snap hooks standard on all positioning lanyards 1/2in Polydac rope available on positioning lanyards 3110, 3111, 3112 1in nylong web available on positioning lanyards 3210, 3211, 3212, 3250 1/4in coated steel cable availble on positioning lanyard 3312 Positioning lanyards available in lengths of 3ft to 6ft and 4ft - 6ft adjustable positioning lanyard available Designed for fall restraint and positioning applications Not meant to be used in fall arrest or fall protection applications
Rebar Positioning Assemblies - Safewaze Fall Protection Rebar chain assembly used for positioning. Comes with two locking snap hooks and one locking rebar hook. These rebar restraint and positioning assemblies have been designed for use while constructing concrete forms or tying rebar. Different setups are available to provide compatible connections with most rebar, forms, and other structures. Models are available with or without swivels, and are made of 5/0 twist-link zinc plated chain. Rebar Chain Positioning Assembly Designed to be used by only one worker. All Safewaze PPE Fall Protection rebar positioning assemblies meet or exceed ANSI, OSHA and CSA standards. Warning! This product is to be used for positioning only, unless it is used in conjunction with a shock absorber and full body harness. Safewaze PPE Fall Protection - Rebar Positioining Assemblies: Rebar positioning assemblies available in both chain and web All rebar positioning assemblies come with a pelican rebar hook All rebar positiong assemblies come with 2 double locking snap hooks Models SF3710-S and PF3710-S are OSHA approved Standard rebar hooks as well as swivel, Symons form rebar hook and Peri form rebar hook available
Tower Assemblies - Safewaze Fall Protection Ideal for communication tower applications. All Safewaze PPE Fall Protection tower assemblies meet or exceed ANSI, OSHA and CSA standards. Warning! This product is to be used for positioning only, unless it is used in conjunction with a shock absorber and full body harness. Both models OSHA approved