The new 80 series V are independently tested to comply with the 2nd edition of ANSI/ISA S82.01 and EN61010-1 CAT IV 600V/CAT III 1000V. They can withstand impulses in excess of 8,000 V and reduce risks related to surges and spikes

The New 80 Series models:

Fluke 83 V Industrial DMM
Fluke 87 V True RMS Industrial DMM
Fluke 87 V/E2 Industrial Electricians Combo Kit
Data logging DMM available

New features maximize productivity

Unique function for accurate frequency and voltage measurements on adjustable speed motor drives and other electrically noisy equipment (87V)

Built in thermometer conveniently enables you to make temperature readings without a separate instrument (87V)

Optional magnetic hanger for easy viewing and setup while keeping your hands free Large digit display

Bright 2 level backlight makes the 80 Series V much more easy to read than previous models

Electrical safety

All inputs are protected to the 2nd edition of ANSI/ISA S82.01 and EN61010-1 CAT IV 600V and CAT III, 1000 V. They can withstand impulses in excess of 8.000 V and reduce risks related to surges and spikes.

Properly measure pulse width modulated motor drive signals

Up till now, there wasn�t a multimeter that was able to measure adjustable speed drives accurately. The new Fluke 87 V is made to specifically handle complex signals. There are no limits to the potential productivity you'll gain by eliminating the guesswork out of troubleshooting drive systems. Measurements are precise every time, and there are unique functions for accurate measurements of noisy pulse width modulated AC voltage.

Measures correctly at the ASD and at the motor terminals

Accurately measure the motor speed or frequency.
Frequency measurements are not affected by the ASDs carrier frequency
Measure AC current with an optional current clamp
Compare readings from the 87V with the display on the ASD
Special shielding blocks high frequency, high energy noise generated by large drive systems

Feature	83V	87V
True-rms ac voltage and current for accurate measurements on non linear signals		�
Selectable filter for accurate voltage and frequency measurements on motor drives		�
0.05 % dc accuracy		�
6000 counts, 3-3/4 digits	�	�
4-1/2 digit mode for precise measurements (20,000 counts)		�
Measure up to 1000 V ac and dc	�	�
Measure up to 10 A, 20 A for up to 30 seconds	�	�
Built in thermometer lets you carry one less tool (TC probe included)		�
Frequency to 200 kHz and % duty cycle	�	�
Resistance, continuity and diode test	�	�
10,000 �F capacitance range for components and motor caps	�	�
Min/Max-Average recording with Min/Max Alert to capture variations automatically	�	�
Peak capture to record transients as fast as 250 �s	�	�
Relative mode to remove test lead interference from low ohms measurements	�	�
Auto and manual ranging for maximum flexibility	�	�
Touch Hold to capture stable readings avoiding noisy signals	�	�
Large display digits and two-level bright white backlight for increased visibility	�	�
Analog bargraph for fast changing or unstable signals	�	�
Input Alert provides audible warning against wrong use of input jacks	�	�
Improved selectable sleep mode for long battery life	�	�
Access door for fast battery changes without breaking the calibration seal	�	�
"Classic" design with new removable holster with built in test lead and probe storage	�	�
Lifetime warranty	�	�