Testo 330 LL Advanced Combustion Analyzers

Testo has the cutting edge technology for Heating Manufacturers and Fitters.

With the extended sensor life of up to 6 years for Oxygen and Carbon Monoxide in the Testo 330 1 LL, the operation and maintainence costs are greatly reduced. At least one change of the Oxygen and Carbon Monoxide cell can be omitted during the typical phase of usage of the unit, and Testo gives a warranty of 4 years on the complete instrument.

The robust probe handle fits comfortably in your hand, and The probe has a quick connection function ensuring that all gas paths are connected  properly. The particle filter in the handle blocks out particles efficiently, and the easy to clean probes require little or no maintenance. Different lengths and diameters ensure a high flexibility level for all applications. When changing the probe, the shaft is simply attached to the probe handle and clicks into place. The multi hole and dual wall clearance probe round off our wide range of flue gas probes. The ambient CO probe as well as the Carbon Dioxide probe are recognized automatically by the analyzer and the measurement results immediately appear in their own graphically supported menu. Measurements can be carried out in their entirety simultaneously with flue gas measurement. The gas leak detection probe which can be attached to the analyzer also has a user defined alarm limit, and a warning signal is triggered if the limit is exceeded. The probe is also recognized automatically and the results are shown in a trend graph in their own menu.

The new, highly robust fast probe connection for all gas paths eliminates any confusion. The space saving single cable cannot be bent and is indestructible. The menu driven operational procedures which are in compliance with current standards, help you to avoid errors and be more efficient.

The Oxygen long life sensor distinguishes itself from the standard sensor through its robust design, an improved diffusion barrier for the protection of the anode material, and a lead free metal alloy. This makes it not only longer living but also more evironmentally friendly.

Testo 330 LL Features:

• Exchangeable Nitrous Oxide filter.
• Rechargable battery
• Calibration protocol
• Mains unit 100 to 240 Volts for mains operation for charging the battery the instrument
• Modular exhaust gas probe, immersion depth 1.5 inches, Ø 5/16 of an inch
• Combustion air temperature probe, immersion depth 7.5 inches
• Hose connection set for separate gas pressure measurement
• Report printer IRDA
• Flexible probe shaft length 11.75 inches, Ø 13/32 inch, Tmax 500 degrees C
• Basic system case for instrument, probes and accessories